Materials Order Desk
Same-day dispatch services
For all other enquiries, please
& next-day premium delivery.
08:30 to 18:00, Mon to Thurs
08:30 to 17:00 on Friday
submit the contact request form.
Free Product Guides
Our easy-to-use product guides offer a detailed overview of the products range including measurements, pricing, order information and much more.
Join our e-mail list. Stay informed about the latest news, product releases and special promotions.
Knowledge Base
- Choosing the Right Vinylvinyl types explained
- Application advice for inkjet digital printingUseful printing tips
- Common Laminating Problems
- Vinyl Removal Tips
- Vinyl application tipsdifferent installation techniques
- Vinyl Weeding Tips
- All About LaminatingHot, Cold and Liquid Laminating
Troubleshooting Laminating problems
When using a laminator for the first time, most likely you will encounter some minor setting problems.
In order to help you save valuable time and prevent costly errors, we made a list of the most common problems that might occur when starting your lamination process.
Problem: Straight wave lines across the output. Cause: Excessive front roller pressure.
Measure: Loosen the front roller pressure.
Problem: Straight Vertical waves in the output.
Cause: Excessive heat at the nip rollers.
Measure: Lower the roller temperature.
Problem: Angled waves on one side of the output. Cause: Insufficient rear left (or right) side roller pressure.
Measure: Tighten the rear left (or right) side roller pressure.
Problem: Angled waves on both sides of output.
Cause: Insufficient rear roller pressure.
Measure: Tighten the rear roller pressure.
Problem: Concave waves in the lamination.
Cause: Excessive rear (pulling) roller pressure.
Measure: Loosen the rear back roller pressure.
Problem: Wake waves.
Cause: Insufficient heat at the nip rollers.
Measure: Raise the roller temperature.