Home

FineCut 7

Spolu s plotrom Mimaki Vám Spandex dodá ZDARMA software FineCUT 7.

FineCut 7 is provided for free when purchasing a Mimaki plotter.

Functions:

• Joining paths  <New function of FineCut7.6>
  This function joins paths that are separated into several lines while reading DXF data, avoids unnecessary head-up for cutting, and finishes the cutting surface finely.

• Cutting preview <New function of FineCut7.6>
  Before starting to cut, start position, the cutting line, cut direction and cutting order, etc can be checked. This function ensures proper cutting. Also if necessary, you can change the conditions.

• Setting cutting conditions for CF3 M-head (milling)
  Cutting conditions with endmill can be set from FineCut7.

• Final pass control  (effective only for CF3 milling)
  When cutting is close to the last part the pass to be cut, the spinning endmill may push the part of the material, so that the last cut part can be shifted and can not be cut smoothly. To prevent this, the last part of the pass is not cut in full to keep the material from shifting. This is done at a last stage cutting with low force for a smooth final cut. 

• FineCut7.6 can also set the joint on multiple positions. This function finishes the cutting surface finely, even with a long-path object or with a flexible media.

• Taking in plot data from other cutting software
  In order to reuse the data made by other company's software or plot data in the past, it reads the plot data with CorelDRAW and Illustrator and can plot via FineCut using the original data.

• Spline approximation (only for CF/CF2/CF3 series)
  By making spline approximation outputting of Bezie Curve, the head moves at a constant speed and can cut smoothly even at a connecting parts of lines.

• Designation of outputting order by color and by layer
  Setting the tool and cutting conditions, the order of cutting can be changed freely within a color or a layer by dragging of the mouse. The cutting is made smoothly coordinated with the features of the tool and the cutting shape to make the beautiful finish.

• Multiple cut of the same part with different cut conditions
  When a hard material or thick material is cut with CF and CF2, it happens that it cannot be cut at one try. By setting the number of cutting times, speed and pressure, etc. for one cut line, FineCut7 is able to cut hard material or thick material by cutting multiple times.
  

System requirements