Need more information on our Equipment and Services?
Do you have a specific request?
Join our e-mail list. Stay informed about the latest news, product releases and special promotions.
Our easy-to-use product guides offer a detailed overview of the products range including measurements, pricing, order information and much more.
The CJV30 Series prints with fast drying EcoHS1 ink. EcoHS1 ink: Improved Gloss level. Outgassing reduced significantly (Improved turnaround times from print to apply). No toxic solvent (NMP, Cyclohexanone) is contained in EcoHS1 ink.
Printability of the ink is extremely impressive eg: finish and quality. Significant improvement with colour gamut.
The number of pinch rollers and their clamp pressures can be set from the RIP software and the pinch roller pressure is automatically changed to suit the thickness of the media. By raising the pinch rollers in the middle at the time of cutting, peeling-off media after cutting is eliminated.
This full automatic function enables unattended operation without manual intervention from the start of printing to the end of cutting. CJV30 automatically adjusts to ensure accurate media feed. This results in high quality finishing of both, print and cut.
CJV30 Series is capable of printing up to 17.3 m2/h (540 x 720 dpi, 4 colours). In standard mode CJV30 can print 11.7 m2/h (540 × 1080 dpi, 4 colours).
The symmetrical ink cartridge arrangement enables reliable and detailed high quality image generation even with bidirectional printing.
CJV30 can print up to 1440 dpi with three different dot sizes. Smooth and beautiful images are produced without graining, even when printing in four colour mode.
For accurate contour cutting of printed images the continuous crop mark detection recognizes registration marks that are printed on the media. Even with a laminated print, contour cutting is performed with great accuracy.
When an ink cartridge runs out, another cartridge automatically begins to supply ink. Ink cartridges can be replaced during printing and overnight continuous printing is possible. The UISS can be used in 4 colour mode and enables a continuous unattended operation.
This function creates a series of half- and die cuts leaving a few connection points that prevent the image from falling.
Splitting the printer head to front and rear, and overlaying printing of color and white enables accurate printing for long periods of time. It's ideal for use in applications which require both transparent and opaque printing.
* For 6 Colour + White Ink Mode
| MAXIMUM PRINT/CUT WIDTH | 610 mm |
|---|---|
| PRINT RESOLUTION | 540 dpi, 720 dpi, 1440 dpi |
| PRINTING MODES | 540 x 720 dpi, 540 x 900 dpi, 540 x 1080 dpi, 720 x 540 dpi, 720 x 720 dpi, 720 x 1080 dpi, 720 x 1440 dpi, 1440 x 1440 dpi |
| INK TYPE | EcoHS1 ink |
| MEDIA WIDTH | 620 mm |
| MEDIA THICKNESS | Less than 1.0 mm |
| ROLL WEIGHT | Less then 25 kg |
| MAXIMUM CUTTING SPEED | 30 cm/s |
| CUTTING FORCE | 10-350 g |
| MEDIA HEATER | Pre/print/post heater |
| MEDIA TAKE UP DEVICE | Roll take-up device (Standard), inside/outside selectable |
| INTERFACE | USB 2.0 |
| DIMENSIONS (W X D X H) | 1524 x 739 x 1424 mm |
| OPERATING ENVIRONMENT | 20ºC -35ºC, 35-65% Rh (No condensation) |
| WEIGHT | 110 kg |
| POWER REQUIREMENTS | AC100V-240V, Less than 1380VA |
| OPTIONS | Drying and exhaust unit
Static cling prevention net* Front cover Sheet basket |